登入開始免費試用
Meta Tech Provider

WhatsApp 自動化沒有回覆?運行狀態與跳過原因一覽

打開自動化的「運行」標籤。已跳過的運行會列出原因:「你最近從手機回覆過此對話」代表你自行回覆後的暫停期,預設為 4 小時;「距離客戶上次訊息已超過 24 小時」則表示只能發送範本訊息。失敗的運行會顯示出錯的步驟及其錯誤。完全沒有運行,代表訊息從未送到此自動化。

easyCoexistence 為你的 WhatsApp 號碼保留 30 天的自動化運行記錄,包括每個步驟的輸出、耗時與 AI 用量,並在運行失敗時發電郵通知,讓你親自回覆該客戶。

6 statuses

運行狀態為排隊中、運行中、等待中、已完成、失敗或已跳過。

15 reasons

運行跳過原因:近期從手機回覆、供應商拒絕的 AI 金鑰、你暫停的對話、無人回答的問題。

30 days

「運行」標籤回溯的時間範圍,最新在前,最多列出 100 項運行。

6 hours

此範圍內每個自動化最多發送一封失敗電郵;運行記錄則保留每次失敗。

60 tests

控制台中「試用」每小時允許的運行次數,樣本最多 2,000 個字元。

是否有任何運行?

先看這點,因為兩種情況的原因不同。「運行」標籤中有一項運行,代表自動化已接收該訊息,其狀態會說明之後發生的事。沒有任何運行,則代表訊息從未送達此自動化。常見原因按最常見排列如下:

  • 號碼設定為「直接發送至你的系統」:列表顯示「號碼已關閉」,訊息會直接送到你自己的端點。在號碼頁面的「收到的訊息去向」下選擇「透過 easyCoexistence」即可修正。
  • 自動化已關閉,或顯示「已暫停:AI 金鑰被拒」。兩者都不會為新訊息啟動運行,較低優先的自動化可能會代為回覆。
  • 觸發條件不符。請在「關鍵字」下的「測試」欄位,輸入客戶的確切字句。
  • 另一個自動化先行回覆。關鍵字規則優先,之後為「首則訊息」、「非辦公時間」及「每則訊息」,所以請檢查其他自動化的運行記錄。
  • 該對話已觸發過「首則訊息」。它只會觸發一次,只有在該客戶 30 天未有訊息後才會再次觸發。
  • 該訊息是表情反應、狀態更新或群組訊息。這些都不會啟動運行。
  • 號碼已被暫停或中斷連線。請在「連接」標籤查看其狀態。

各運行狀態代表什麼?

「運行」標籤每行的標示為六種狀態之一。只有「失敗」會發電郵通知你:「已跳過」代表內建防護刻意停止了運行,「等待中」代表運行停在等待步驟,或停在等待客戶回答的問題上。來自「試用」的測試運行帶有「測試」標籤,且從不發送任何內容,因此無法解釋客戶為何沒有收到回覆。

QueuedCreated for the message and about to run its first step.
RunningA step is in progress, such as the AI writing or your webhook answering.
WaitingParked on a Wait step or on a question until its time is up, unless your reply, or on a Wait a newer message that restarts the automation, ends it.
DoneAll steps finished. Open it to read the exact text that was sent.
FailedA step failed and the rest were skipped. A run cut off by a restart reads "Interrupted by a restart".
SkippedA guard stopped the run; the skip reason under it says which.

各跳過原因代表什麼,又如何修正?

已跳過的運行會顯示 15 個標籤之一,同一標籤也會出現在運行停止的步驟上。下表列出最常見的九個,文字與介面完全一致。其他的是「此對話已暫停機器人」(「交給真人」步驟,或在「對話」中或透過 update_contact 設定的暫停)、「一小時內向此對話發送了過多自動訊息(兩個機器人互相回覆?)」、「他們沒有在 24 小時內回答問題」(「提出問題」步驟)、「本次運行已跳轉 20 次:流程改為繼續往下執行」、「要跳轉的步驟已不存在」,以及兩個只有社交帳戶使用的原因。大部分情況是系統正常運作,所以通常只需調整設定,而非程式錯誤。先閱讀標籤,再對照相應列項。透過 MCP 連接器,同樣的原因會以代碼返回,例如 human_active、window_closed、ai_limit 與 superseded。

What happenedWhat to do
You answered this chat from your phone recentlyYou replied from the WhatsApp Business app within the pause, 4 hours by default, or during a Wait.Nothing, if intended. Change "Pause on a chat after I answer it (hours)" under Advanced; 0 turns the pause off.
More than 24 hours since the customer's last messageMeta accepts text from the API only within 24 hours of the customer's last message.Use a Send a template step for later messages, or shorten the waits before a text step.
AI reply limit for this chat reached this hourThe chat hit "AI replies per chat per hour, at most", 10 by default.Raise it under Advanced, up to 60, if real customers reach it; the cap also stops two bots answering each other.
A newer message from the customer took overA newer message started the same automation on that chat and replaced the run that was waiting.Nothing: the newer run answers. Moving the automation to another number ends waiting runs the same way.
Automations are off for this numberWhile the run waited, the number moved to "Straight to your system", or was suspended or removed.Choose "Through easyCoexistence" on the number's page, or reconnect the number.
The account needs reconnectingNot used for WhatsApp numbers; a number in that state shows the reason above instead.Check the number on the Connections tab.
Automation is offThe automation was switched Off while this run waited.Switch it On and press Save.
Paused until the AI key works againThe AI provider refused the key, which pauses the automations that use it.Save a working key under "AI keys"; the automations restart by themselves.
Automation was deletedRare: the automation disappeared while one of its runs was in progress.Create it again. Deleting an automation also deletes its run history.

運行為何失敗?

打開運行,找到標示為「失敗」的步驟:其錯誤即為原因,之後的每個步驟都會顯示「已跳過」。你亦會收到一封主旨為「<自動化> 未能回覆 <客戶>」的電郵,附「打開運行」按鈕,讓你可以用手機直接回覆該客戶。以下是最可能見到的錯誤:

  • 「Webhook 未有回應」:你的 URL 超過 20 秒,或拒絕了連線。
  • 「Webhook 回應 HTTP 500」或其他代碼:只有 2xx 回應會被視為成功,且不會跟隨重定向,所以 301 或 302 也會失敗。
  • 「Webhook URL 被拒」:URL 並非 HTTPS,或指向私人地址。
  • 「模型返回了空白回覆」,或來自 AI 供應商的錯誤,例如模型 ID 錯誤或速率限制。AI 呼叫的時限為 45 秒。
  • 「Meta (400): ...」:Meta 拒絕發送,例如範本未獲批准,或變數留空。

為何「試用」正常,真實訊息卻不行?

因為測試只檢查步驟,並不會檢查真實訊息抵達這些步驟的路徑。按「測試」會開啟「試用」,「執行測試」會以你的樣本運行已儲存的步驟:AI 會真的用你的金鑰作答,你的 webhook 亦會真的收到一個標示 dry_run 為 true 的 POST,但不會發送給任何人。它並不檢查觸發條件、號碼的模式、哪個自動化會勝出、你手機的暫停,或 24 小時視窗。AI 只會讀取樣本,不會讀取較早的訊息;「等待」會顯示「將等待 120 分鐘」並繼續執行。通過的測試只證明步驟可以運作;「運行」標籤則顯示真實訊息實際發生了什麼。

如何閱讀一項運行?

「運行」標籤列出過去 30 天的記錄,最新在前:包括狀態、測試運行上的「測試」標籤、客戶的訊息或「[image]」等佔位符、其名稱或號碼,以及發生時間。打開一項運行,可看到跳過原因(如有),然後是每個步驟的「成功」、「失敗」或「已跳過」,其所需秒數、AI 權杖用量(顯示為「312 in, 58 out tokens」)、實際發送的文字或錯誤。你的 AI 也可讀取同一紀錄:透過 MCP 連接器,list_automation_runs 可按狀態篩選運行,get_automation_run 則返回單一項目,因此在 ChatGPT 或 Claude 中詢問今早自動化為何沉默,便會得到根據跳過原因整理的答案。

設定方法

  1. Open the Runs tabOn the Automations tab, open the automation, then Runs. Find the customer's message by its text and time.
  2. Read the status and the reasonSkipped shows the reason in plain words; Failed shows the step that broke and its error.
  3. No run: check the number's modeOn the number's page, the card "Where incoming messages go" must be set to "Through easyCoexistence", not "Straight to your system".
  4. Check the switch and the keyThe automation must be On, not "Paused: AI key refused", and "AI keys" must show the key as Works rather than Refused.
  5. Check the trigger and the orderTry the customer's words in "Test it" under Keywords, and remember that keyword automations answer before the others.
  6. Check for your own recent replyIf you answered that chat from the phone in the last few hours, the pause is doing its job; once it ends, the customer's next message gets an answer.

常見錯誤

  • 用自己的手機測試,然後在商務應用程式回覆,以確認效果。該回覆會令自動化在該對話暫停 4 小時,因此之後的測試都會顯示「你最近從手機回覆過此對話」。
  • 對「首則訊息」自動化重複發送同一測試訊息。它每個對話只觸發一次,所以第二則訊息不會有任何結果;請改用「執行測試」測試步驟,或從另一部手機發送。
  • 把通過的「試用」當作真實訊息會正常運行的證明。它會跳過觸發條件、號碼模式與 24 小時視窗,因此請同時檢查關鍵字與號碼。
  • 將「呼叫我的 Webhook」指向會重定向的 URL。由於重定向不會被跟隨,301 或 302 會令該步驟失敗,並阻止其後的步驟;請改用最終的 HTTPS 地址。
使用 EasyCoexistence 完成這項設定

你的 AI 可透過 MCP 連接器讀取同一紀錄,並以淺白文字解釋。每個號碼每月由 US$ 9 降至 US$ 0.75,號碼越多越便宜,首 3 天免費。

常見問題

為何客戶收到兩則回覆?

通常是兩個系統同時回覆。WhatsApp 商務應用程式本身的問候語或離開訊息,在連接後仍會繼續運作,軟件無法看到它;你自行架設、透過轉發 URL 運作的機械人亦可能回覆。若一個自動化同時包含「以文字回覆」與「以 AI 回覆」步驟,也會發送兩則訊息。

自動化關閉期間收到的訊息,會被回覆嗎?

不會。只有在訊息抵達時已有相符的自動化為開啟狀態,訊息才會啟動運行,且不會留待稍後處理。請直接從應用程式回覆這些客戶,或請你的 AI 在客戶最後一則訊息的 24 小時內發訊息給他們。

如何只在單一對話停止自動化?

在 WhatsApp 商務應用程式中回覆該對話。之後自動化會在該處保持靜默,時長為「回覆後暫停對話(小時)」所設定的時數,最多 168 小時,即一週。你也可以在「對話」中為某位聯絡人關閉自動回覆,時長為 1、4 或 24 小時,或直至你重新開啟為止;亦可請你的 AI 以 update_contact(pause_hours)代勞。其他對話仍會保持自動回覆。

失敗的運行會自動重試嗎?

不會。失敗的運行會保持失敗狀態,電郵的存在是為了讓人員回覆該客戶。請先修正原因並執行測試;客戶的下一則訊息會啟動新的運行。Meta 對訊息的自動重試,永遠不會產生第二次運行。

繼續閱讀

準備開始嗎?

幾分鐘內設定 WhatsApp Coexistence,而非幾個月。應用程式在手機上仍可繼續運作。

開始免費試用

驗證日期